sales@goldenskygroup.cn

FAQS

FAQS

  • 1. Food saver vacuum sealer Instruction manual
  • 2. Impulse hand heat sealer Instruction manual
  • 3. Foot Pedal Operated Impulse Heat Sealers Instruction manual
  • 4. Heat blowers and hot air guns Instruction manual
  • 5. Hot melt glue guns Instruction manual
  •  
  • 1. Food saver vacuum sealer Instruction manual:
  • 1)Put the items inside the bag. Clean and straighten the open end of the bag, clearing away any dust and smoothing out wrinkles or ripples.
  • 2)Place the open end of the bag in the vacuum chamber beneath the air intake. Do not overfill the bag.
  • 3)Close the lid and then press on both sides of the lid,and lock the buckles.
  • 4)Press the "Vacuum & Seal" Button and the green LED will blink, the bag will be automatically vacuumed.
  • 5)When the LED turns to be red, the bag will be automatically sealed.
  • 6)When the LED turns to be green again, the process is completed.
  • 7)Open the vacuum releasing valve and release the vacuum pressure inside the machine.
  • 8)Open the upper lid and take out the bag. Refrigerate or freeze sealed food bag if needed.
  •  
 2.Impuls hand heat sealer Instruction manual:
1)The machine should be checked before use external wire insulation safety.
2)The aircraft must be equipped with a high sensitivity for use in electric shock protection device power outlet, and make electrical safety precautions.
3)Prohibits thunderstorm days, humid environments.  
Ⅰ、Purpose       
This sealer is suitable to seal every kind of plastic films and widely used in the fields such as food and sweet stuff, drags, native and special goods ,electric appliance parts etc, It is easy-using and economical sealing equipment for manufactures ,stores and service industry.  
Ⅱ、Operation       
1. This machine don't use the power switch .Put the AC cord into100v-200v socket, according to the thickness of the materials to be sealed ,regulate the heat time duration. Put the plastic bag on the sealing platform, then put down the handle. The electronic  circuit controls the heat time automatically. Once the light turns off, the power is cut off automatically .About 1-2 seconds later, release the handle and the perfect seal is completed.       
2.If the break or damage appears on the seal, it is because of the over-long heat time. Please regulate the heat time toward the direction s for shorter time.     
3.If the plastic bag sticks to the handle rubber, it is because the cooling time is not enough. Please prolong the cooling time after the light turns off, and release the handle later.
4.After regulating the heat time duration ,please keep it unchanged in every time use. Unnecessary to make any regulation for the continuous sealing.       
5.The AC cord is surely plugged into the socket all the time, and  it dose not consume the power at all under non-use condition.       
6.The machines of PFS-200B and 300B are able to print numbers while sealing.If printing is not needed ,please turn over the handle rubber.   
Ⅲ、Notices
1.Always keep the sealing platform clean, avoiding the oxide of the residual on that platform which will reduce the life of the heating element and of the heat-resistant cloth.       
2.Don't use the wet article to clean the sealing platform.       
3.If the cushion under the heating element is broken, it will make this machine into short circuit and damage the heating element .So ,please check the cushion every time in replacing the heating element.Replace a new one once finding it broken.       
4.The replaced heating element should be the same specifications with the broken one's.       
5.Please check the handle rubber after long-time use. The damage of handle rubber will influence the sealing effect.