Table Impulse Sealer Plastic Poly Bag Close Machine PFS-200D

Sale And Export Portable Sealing 8"/200 mm/8 inch/20 cm Long Sealing 3.0 mm Width Table Impulse Sealer PFS-200D Packing Sealing Plastic Poly Film Bag Close Machine From Zhejiang Tianyu industry Co. Ltd Factory.Portable Sealing 3.0 mm Width Table Impulse Sealer PFS-D Series Packing Sealing Plastic Poly Film Bag Close Machine is the machine of mechanical seal packing container. In order to keep the product quality and avoid the loss of product, it can be used to seal the product after into the container. And you can use it with power-saving that save your money. This product does not require preheating. The weight of this machine is light, you can use it easily.
Portable Sealing 3.0 mm Width Table Impulse Sealer PFS-D Series Packing Sealing Plastic Poly Film Bag Close Machine is gadgets suitable for production and sealing of sacks and bags from thermo-sealing film. By default all types of impulse sealers are fitted with sealing time controller according to film type and thickness. Sealing is indicated by indicator light. Seal is made by a resistive canthal planchett if need be by wire.
Portable Sealing 3.0 mm Width Table Impulse Sealer PFS-D Series Packing Sealing Plastic Poly Film Bag Close Machine does not need a power switch (automatic control) to plug the AC power cord into the socket, and adjust the heating time according to the thickness of the material to be sealed. Place the plastic bag on the sealing surface, and then press the handle, the circuit automatically controls the heating time. When the indicator light goes out, the power supply is automatically disconnected. After about 1-2 seconds, let go of the handle and the seal is complete.In case the sealing part is damaged when the one is connected, it is because the heating time is too long, please turn the knob counterclockwise to shorten the heating time.If the sealing is not strong, it is because the heating time is too short. Please turn the knob clockwise to extend the heating time.If the plastic bag is stuck on the rubber pressure plate, it means that the cooling time is not enough, and the cooling time after the indicator light goes out must be prolonged. Please let go of the handle later.After the heating time is adjusted, it should remain unchanged during use, and there is no need to make any adjustments during continuous use.The hand-pressing plastic bag sealing machine can always plug the AC power cord into the power socket, and does not consume power when it is not sealed.