Manual Impulse Plastic Bag Film Closer Hand Sealer PFS-400
Make and Supply Manual Sealing Length 16"/400 mm/16 inch/40 cm With Sealing 3.0 mm Width Electric Flat Heat Wire Impulse Plastic Bag Film Closer Hand Sealer PFS-400 Ploy Film Heat Sealer From Zhejiang Tianyu industry Co. Ltd. Supplier Factory.Manual With Sealing 3.0 mm Width Electric Flat Heat Wire Impulse Plastic Bag Film Closer Hand Sealer PFS Series Ploy Film Heat Sealer does not need a power switch (automatic control) to plug the AC power cord into the socket, and adjust the heating time according to the thickness of the material to be sealed. Place the plastic bag on the sealing surface, and then press the handle, the circuit automatically controls the heating time. When the indicator light goes out, the power supply is automatically disconnected. After about 1-2 seconds, let go of the handle and the seal is complete.In case the sealing part is damaged when the one is connected, it is because the heating time is too long, please turn the knob counterclockwise to shorten the heating time.If the sealing is not strong, it is because the heating time is too short. Please turn the knob clockwise to extend the heating time. If the plastic bag is stuck on the rubber pressure plate, it means that the cooling time is not enough, and the cooling time after the indicator light goes out must be prolonged. Please let go of the handle later. After the heating time is adjusted, it should remain unchanged during use, and there is no need to make any adjustments during continuous use. The hand-pressing plastic bag sealing machine can always plug the AC power cord into the power socket, and does not consume power when it is not sealed.
Manual Sealing Length 16"/400 mm/16 inch/40 cm With Sealing 3.0 mm Width Electric Flat Heat Wire Impulse Plastic Bag Film Closer Hand Sealer PFS-400 Ploy Film Heat Sealer Specification:
Manual Sealing Length 16"/400 mm/16 inch/40 cm With Sealing 3.0 mm Width Electric Flat Heat Wire Impulse Plastic Bag Film Closer Hand Sealer PFS-400 Ploy Film Heat Sealer Package List:
1XPFS-400 Manual Impulse Plastic Bag Film Closer Hand Sealer Ploy Film Heat Sealer
2X16"/400 mm/16 inch/40 cm Long Spare Heat-resistant Strip
2X16"/400 mm/16 inch/40 cm Long Spare Heating Wire
1XEnglish User Manual
1 PCS/Color Box
Color box Size:575x105x190 mm
PFS-400 Manual Impulse Plastic Bag Film Closer Hand Sealer Ploy Film Heat Sealer Weight:2.82 Kg
10 PCS/CTN
Carton Size:590x555x390 mm
G.W/CTN:26.5Kg
Manual Sealing Length 16"/400 mm/16 inch/40 cm With Sealing 3.0 mm Width Electric Flat Heat Wire Impulse Plastic Bag Film Closer Hand Sealer PFS-400 Ploy Film Heat Sealer Features:
- Applicable to all thermoplastic film, such as: polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), bubble film, etc.
- Welding time/pulse length is easy to adjust. The welding length is 400mm and the weld width is 2-3 mm.
- Pulse length can be adjusted infinitely, with indicator light. After inserting the film into the weld, press the bracket until the indicator light is off.
- No power consumption in standby mode, more energy saving.
- Includes additional wear parts such as welding wire and masking tape.
- It has a strong case and can be used in homes or businesses, portable and practical.
- Strong plastic ABS body
- Labor-saving design with long handle. Low power consumption. Built-in fuse for safe using.
- Ideal for sealing plastics bags, polythene, bubble wrap in household, supermarkets, kitchen or stores, such as cafe shop, candy store, snack booth, medicine shops, small factories etc.
- Create airtight seal and prevent your food from tasting bland and stale and lock in freshness and flavor. Also safely pack cosmetics when traveling
- Professional Heat Sealer will easily reseal original plastic bags so food will stop being exposed to dust and bacteria. Store food in original packaging.
- You will keep it handy in your kitchen, outdoor, cabinet or anywhere you need it.
Manual Sealing Length 16"/400 mm/16 inch/40 cm With Sealing 3.0 mm Width Electric Flat Heat Wire Impulse Plastic Bag Film Closer Hand Sealer PFS-400 Ploy Film Heat Sealer Specification:
- Material: ABS Plastic
- Voltage: EU Plug, 220V50HZ,/110V/60HZ
- Pulse power: 600 W
- Maximum sealing length: 16"/400 mm/16 inch/40 cm
- Maximum bag sealing thickness: 0.4X2 mm
- Maximum interface width: 2-3mm
- Heating time: 0.2-1.5s
- Film thickness: PE 0.06-0.2mm / PP 0.03-0.8mm
- Welding time: infinitely adjustable
- Size: 57.5X10.5X19 CM
- Item Weight: 2.82 Kg
Manual Sealing Length 16"/400 mm/16 inch/40 cm With Sealing 3.0 mm Width Electric Flat Heat Wire Impulse Plastic Bag Film Closer Hand Sealer PFS-400 Ploy Film Heat Sealer Package List:
1XPFS-400 Manual Impulse Plastic Bag Film Closer Hand Sealer Ploy Film Heat Sealer
2X16"/400 mm/16 inch/40 cm Long Spare Heat-resistant Strip
2X16"/400 mm/16 inch/40 cm Long Spare Heating Wire
1XEnglish User Manual
1 PCS/Color Box
Color box Size:575x105x190 mm
PFS-400 Manual Impulse Plastic Bag Film Closer Hand Sealer Ploy Film Heat Sealer Weight:2.82 Kg
10 PCS/CTN
Carton Size:590x555x390 mm
G.W/CTN:26.5Kg
HS CODE:8422303090
Manual With Sealing 3.0 mm Width Electric Flat Heat Wire Impulse Plastic Bag Film Closer Hand Sealer PFS Series Ploy Film Heat Sealer Specification:
Model No. | FS-400 | PFS-400 |
Body | Iron Case | Plastic ABS Shell |
Power voltage | AC220V/50HZ 110V/60HZ | |
Impulse power | 600W | 600W |
Max sealing length | 16"/400 mm/16 inch/40 cm | 16"/400 mm/16 inch/40 cm |
Max sealing width | 3 mm | 3 mm |
Max sealing thickness | 0.8 mm | 0.8 mm |
Adjustable heating time | 0.2-1.5 S | 0.2-2 S |
Dimensions (L x W x H)mm | 575X105X195 | 575X105X190 |
Weight | 3.26KGS | 2.82KGS |
QTY/CTN | 10 PCS | 10 PCS |
Carton Size(mm) | 590X570X390 | 590X555X390 |
G.W/CTN(Kg) | 33.6 | 29.2 |
QTY(sets)/20'GP | 2140 | 2200 |
QTY(sets)/40'GP | 4430 | 4550 |
QTY(sets)/40'HQ | 5190 | 5350 |