Manual 12＂Impulse Sealer 300mm Hand Sealing Machine PFS-300

Make and Wholesale Manual 12" Impulse Sealer Plastic Poly Bag Closer PFS-300 Sealing 12" /300 mm/12 inch/30 cm Length With Sealing 2.0 mm Width Electric Flat Heat Wire Hand Sealing Machine From Zhejiang Tianyu industry Co. Ltd. Supplier Factory Manufacturer.Manual Impulse Sealer Plastic Poly Bag Closer PFS Series Sealing 2.0 mm Width Hand Sealing Machine does not need a power switch (automatic control) to plug the AC power cord into the socket, and adjust the heating time according to the thickness of the material to be sealed. Place the plastic bag on the sealing surface, and then press the handle, the circuit automatically controls the heating time. When the indicator light goes out, the power supply is automatically disconnected. After about 1-2 seconds, let go of the handle and the seal is complete.
Manual Impulse Sealer Plastic Poly Bag Closer PFS Series Sealing 2.0 mm Width Hand Sealing Machine is for almost any sealable films and bags. Work for Polyethylene (PE),Polypropylene (PP),Polyvinylchloride (PVC),Polyurenthane, Polyolefin,Pliofilm,Kel-F,Polyflex,Mylar,P.V.A.,Tivac,Saran,Nylo and all other sealable films,bags.The hand-pressing plastic bag sealing machine can always plug the AC power cord into the power socket, and does not consume power when it is not sealed.In case the sealing part is damaged when the one is connected, it is because the heating time is too long, please turn the knob counterclockwise to shorten the heating time.If the sealing is not strong, it is because the heating time is too short. Please turn the knob clockwise to extend the heating time.If the plastic bag is stuck on the rubber pressure plate, it means that the cooling time is not enough, and the cooling time after the indicator light goes out must be prolonged. Please let go of the handle later.After the heating time is adjusted, it should remain unchanged during use, and there is no need to make any adjustments during continuous use. 
 

HS CODE:8422303090