Impulse Sealer 3 mm Flat Wire Heat Sealing Machine PFS-200D

Manufacture and Making Hand Sealing 8"/200 mm/8 inch/20 cm Length With Sealing 3 mm Width Electric Flat Heat Wire Impulse Sealer PFS-200D Sealing 3 mm Width Plastic Bag Heat Sealing Machine From Zhejiang Tianyu industry Co. Ltd. Supplier Factory Manufacturer.Hand Sealing 8"/200 mm/8 inch/20 cm Length Impulse Sealer PFS-D Series Sealing 3 mm Width Plastic Bag Heat Sealing Machine is inexpensive and portable machines used to seal Plastic bags, polypropylene (poly bags), bubble bags, PVC, polyester, poly/cello films, humidity-proof cellophane film, aluminum foil bag, PO-film-coated EPE foam bag, kraft paper bag and teabag. They are used to seal products such as medical pouches, food and beverage products, gift items, and office supplies.The Led indicator Light is on only when the machine is sealing,it's not on if you just connect it to socket.
Just connect the power cable to your socket,adjust the heating time according to Sealing Thickness of the material.Put the plastic bag on it,then press the handle,the led indicator light will be on,the machine will control the heating time itself.When the LED indicator light is off, the power automatically disconnect.Release the handle after 1-2 seconds,then it’s finished sealing.The Led indicator Light is on only when the machine is sealing,it's not on if you just connect it to socket.If damage appears when it’s sealing,that’s because the heating time is too long,then shorten the heating time by rotating the timer knob with anticlockwise rotation.If Insecure sealing appears,that’s because the heating time is too short,then extend the heating time by rotating the timer knob with clockwise rotation.If the plastic bag is sticky to machine,that’s because the cooling time is not long enough.Please extend the cooling time after the LED light is off,hold longer time to release the handle.If heating time is adjusted,don’t do any change when it’s sealing or continuous sealing.You can always connect the power cable to the socket,because if it’s not sealing,it won’t have any Electrcity consumption.